Customization: | Available |
---|---|
Type: | Set Equipment |
Protocol: | TCP/IP |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications
Key Features | * Key Component of IP Telephony & Unified Communications * Open Hardware Platform based-on X86 * Easy to install 3rd party IP PBX such as Asterisk, Freeswitch, 3CX, Issabel, VitalPBX software * Open API * Perfect for Vertical markets * Voice, Fax, Modem & POS * Up to 10 interface boards, Hot swappable * Up to 16 E1/T1 ports * Up to 80 FXS/FXO ports * Up to 40 GSM/LTE ports * Redundant Power Supplies |
Hardware Specification | * MCU: 2* Main Control Unit, active/standby * HDX: 2* Ext. Hard Disk Unit, active/standby * SCU: 2* Switch Control Unit, active/standby * DTU: 4* E1/T1 ports, up to 8 boards * FXS: 8* FXS ports, up to 10 boards * FXO: 8* FXO ports, up to 10 boards * 4S4O: 4*FXS+4*FXO, up to 10 boards * GSM/LTE: 4* GSM/LTE,up to 8 boards * PWR: 2* 110~220VAC power modular * FAN: 2* FAN cooling modular |
MCU (Main Control Unit) |
* X86 structure control unit with two hardware configuration options: 1) Standard: CPU: Intel J1900 2.0GHz, 4 cores; Intel E3845 1.9GHz, 4 cores RAM: DDR3L 1600MHz 8GB 2) Advanced: CPU: Intel i5-6300U 2.4GHz, dual cores RAM: DDR4 2133MHZ 32GB * Network: 10/100/1000Mbps Gigabit LAN * 1* HDMI video connector * 1* USB 2.0 * 1* USB 3.0 * 128GB SSD hard disk, extendable by HDX |
HDU ( Ext. Hard Disk Unit) |
* Extend hard disk storage of MCU board * 1* SSD/HDD hard disk space * 1* VGA video connector * 4* USB 2.0 * Mic and Speaker |
SCU (Switch Control Unit) |
* CPU: 1.8GHz, 8 cores * RAM: DDR3 512MB * Flash: 32MB * EMMC: 8GB * Network: 2* 10/100/1000Mbps * Console: 1* 115200bps, RJ45 * USB 2.0: 1 |
Media Processing | * Codecs: G.711A/U,G.723.1, G.729AB, iLBC, AMR * Silence Suppression * Comfort Noise Generator(CNG) * Voice Activity Detection(VAD) * Echo Cancellation * Dynamic Jitter Buffer * Programable Gain Value * T.38 and Pass-through FAX * Modem and POS terminal * DTMF: RFC2833/SIP Info/Inband * VLAN 802.1p/q * Lay3 QoS and DiffServ |
FXS | * Connector: RJ11 * Caller ID: Bellcore Type 1&2, ETSI,BT,NTT and DTMF * Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone * Polarity Reversal * Hook Flash |
FXO | * Connector: RJ11 * Caller ID: FSK, DTMF * Polarity Reversal * Answer Delay * Busy Tone Detection * No Current Detection |
FXS/FXO Features | * Port Group/Hunting Group * Digitmap * Flexible Call Routing Rules * Caller/Called Number Manipulation Rules |
VoIP Protocol | * SIP v2.0 (UDP/TCP),RFC3261SDP,RTP(RFC2833), RFC3262, 3263,3264,3265,3515,2976,3311 * SIP TLS * RTP/RTCP, RFC2198, 1889 * SIP-T,RFC3372, RFC3204, RFC3398 * RFC4028 Session Timer * RFC2806 TEL URI * RFC3581 NAT, rport * NAT Traversal: dynamic NAT, STUN |
DTU | * Connector: RJ48C * 4* Port E1/T1 per board * Support ISDN PRI and SS7 signaling * ISDN PRI: 23B+D(T1), 30B+D(E1), ITU-T Q.921, ITU-T Q.931, Q.Sig * SS7: ITU-T, ANSI, ITU-CHINA, MTP1/MTP2/MTP33, TUP/ISUP * E1 Frame : DF, CRC4, CRC_ITU * T1 Frame: 4-Frame Multiframe (F4,FT),2-Frame Multiframe (F12, D3/4),Extended Superframe (F24, ESF) ,Remote Switch Mode (F72, SLC96) * Local/Remote Clock Source |
DTU Features | * Local/Remote Ringback tone * Overlap Dialing * Dial plan up to 2000 * E1 Group/ Timeslot Group * SIP Trunk/SIP Trunk Group * Codecs Group * Caller/Called Blacklist * Caller/Called Whitelist * Access Rule List |
GSM/LTE | * 4* GSM/LTE channels per board * Antenna Connector: SMA * SMS/USSD/PIN * Provides GSM and LTE boards depends on network frequency of users: GSM: 850/900/1800/1900MHz LTE frequency band options: Type A: FDD: B2/B4/B12 WCDMA: B2/B4/B5 Type E: FDD:B1/B3/B5/B7/B8/B20 TDD: B38/B40/B41 WCDMA: B1/B5/B8 GSM:900/1800MHz Type V: FDD:B4/B13 Type J: FDD:B1/B3/B8/B18/B19/B26 TDD:B41 WCDMA:B1/B6/B8/B19 Type AU: FDD:B1/B2/B3/B4/B5/B7/B8/B28 TDD:B40 WCDMA: B1/B2/B5/B8 GSM: 850/900/1800/1900 |
Network | * Static IP * IPv4, IPv6, TCP/UDP,TFTP, FTP, ARP, RARP,ICMP,NTP, SNTP, DNS,Tracert * HTTP,HTTPS * VLAN(TBD) |
Capabilities | * Extensions: 5000 * Concurrent Calls: 100~300 * Register Per Second: 200/s * Call Per Second: 100/s |
Maintenance | * Web GUI configuration and maintenance * Configuration backup and restore * PSTN call and release cause statistics * SIP call and release cause statistics * HTTP firmware upgrade * Network capture * Syslog: Debug, Info, Error, Warning, Notice * Call history record * NTP |
Call Features | * Flexible Route Methods PSTN-PSTN, PSTN-IP, IP-PSTN * Intelligent Routing Rules * Call Routing base on Time * Call Routing base on Caller/Called Prefixes * 256 Route Rules for each Direction * Caller and Called Number Manipulation |
Environmental | * 1+1 Power Supply, hot plug * Input: 100-240VAC, 50-60 Hz * Power Consumption:200W * Operating Temperature:0 ºC ~ 45 ºC * Storage Temperature: -20 ºC ~80 ºC * Humidity:10%-90% Non-Condensing * Dimensions(W/D/H): 437*345*132mm * Unit Weight: 16kg * Compliance: CE, FCC |
Model List of IPPBX
Model | WiFi | SIP Extensions | Concurrent Calls | Mobile Channel | FXS | FXO | E1 |
UC100 (MOQ500) | 2.4GHz,802.11b/g/n | 32 | 8 | 1 | 1 | 1 | 0 |
UC120 | 2.4GHz,802.11b/g/n | 60 | 15 | 1 | 1 | 1 | 0 |
UC200 | NO | 500 | 30 | 0 | 2 | 2 | 0 |
UC350 | NO | 1000 | 200 | 0 | 32 | 32 | 4 |
UC2500 | NO | 5000 | 300 | 0 | 80 | 80 | 32 |
UC8000 | NO | 20000 | 4000 | 0 | 0 | 0 | 0 |
Certificate